Equity
€24,254 from €77,389 in 2007
Equity fell by 69% in 18 years.
TECHNICAL WELDING SUPPORT
Lifetime
20 annual accounts with figures on one time axis, 27 filings since 1999peak €225,360 (2015)
€145,721▼ 2.3%
lowest -€45,131 (2019)
€23,093▲ 513%
peak €77,389 (2007)
€24,254▲ 21×
€169,877▼ 5.2%
peak 3.5 FTE (2010)
-not published
Board1 name since 2021
1 director
Documentsfilings and deeds
05-05-202687 days before the deadline
2025micro format
Result from €3,769 to €23,093Change of role: , from statutory manager to director 13-02Equity from €1,161 to €24,254Cash from €27,494 to €50,442
Key points
from the 2025 annual accountsDebts
€169,877 88% of the balance sheet
Financial debts 20%Suppliers 8%Taxes and wages 2%Other 70%
Of this, €136,691 falls due within a year.
Position in the sector
12.5%
Lower solvency than 82% of companies in fabricated metal products. Sector median 45.1% · 2,515 companies.
Checked score
Bankruptcy probability within 12 months
Financial strength
Score breakdown
Comparable companies, two years later
In July 2024, 3,820 companies had the same profile as TECHNICAL WELDING SUPPORT has now. Each dot stands for 10 companies, two years later.
95.1%
were still trading
3.8%
stopped another way
1.0%
went bankrupt
Another 0.2% stopped without a precise date, possibly only after those two years.
Test of the method
The method was tested on the 497,762 companies of July 2024. Each company was given the bankruptcy share of the same profile a year earlier, in July 2023. The expectation was that 1.6% would go bankrupt within 24 months. In fact 1.7% went bankrupt.
| Group | Expected | Actual |
|---|---|---|
| 1 | 0.2% | 0.2% |
| 2 | 0.3% | 0.5% |
| 3 | 0.5% | 0.6% |
| 4 | 0.7% | 0.8% |
| 5 | 0.9% | 0.9% |
| 6 | 1.3% | 1.5% |
| 7 | 1.6% | 1.8% |
| 8 | 1.8% | 1.8% |
| 9 | 2.9% | 3.1% |
| 10 | 5.6% | 6.1% |
A company that went bankrupt had a higher expected share than one that kept going in 74.5% of comparisons. The level depends on the economy. In a year with more bankruptcies than the year before, the actual share is higher than the expected one.
This is an observation about 3,820 companies, not a prediction for TECHNICAL WELDING SUPPORT. The sector does not count, because the KBO no longer lists a sector for a company that has stopped. By sector, mostly the survivors would count, which would paint too rosy a picture.
Credit verdict
Credit check for an amount and term of your choice
Show the recommended maximum and see how the verdict changes with amount, term and advance.
The scores and ratios are Checked's own calculations, not a credit decision.
Signals
Recent changes
Registered in the Peppol Directory
Reachable for e-invoices through 0208:0464142723
Change of role: , from statutory manager to director
Director discharge: · Gazette deed
First establishment
TECHNICAL WELDING SUPPORT/Art Design Luca, Lerrekensstraat 25 C, Heist-op-den-Berg
Incorporation
published on 02-10-1998 · Gazette deed
Comparable companies
same main activity, similar in size and age| Company | ||||
|---|---|---|---|---|
| TECHNICAL WELDING SUPPORT Heist-op-den-Berg | €194,131 | €145,721 | 12.5% | - |
| ALGEMENE METAALBOUW Antwerp | €178,829 | €116,292 | 69.8% | - |
| MONTAGE CEUSTERS Geel | €255,812 | €168,880 | 84.2% | - |
| ANLOSIEL CONSTRUCTIE Beveren-Kruibeke-Zwijndrecht | €167,407 | €99,020 | 92.8% | - |
| MORGAN'S INTERNATIONAL Mechelen | €192,675 | €237,697 | 62.7% | - |
| NORAM Wommelgem | €263,823 | €115,027 | 77.2% | - |
| ANTWERPS TECHNISCH VERENBEDRIJF Schelle | €216,338 | €96,509 | 50.4% | 1 |
These companies have the same main activity as TECHNICAL WELDING SUPPORT: manufacture of metal structures and parts of structures (NACE 25110). They are comparable in size and age: total assets between €167,000 and €264,000, founded between 1992 and 2003.
Official details
Source: KBO- Status
- Active since 22-09-1998Normal situation
- Activity
- Manufacture of metal structures and parts of structuresNACE 25110and 5 others
- Establishment unit
- 2.152.866.3022220 Heist-op-den-Berg, since 12-04-2006
- Financial year end
- 31 December
- Peppol
- Reachable since 25-06-2025
Annual accounts 2025
- ≈ €360,000estimated
- €194,131▲ 7.7%
- Employeeson 31-12-2025
- 2=
- Filing
- Filed on 05-05-2026, 87 days before the end of the filing period
Insights on TECHNICAL WELDING SUPPORT
TECHNICAL WELDING SUPPORT files the micro format. That format states no turnover. The gross margin rose from €114,781 in 2006 to €145,721 in 2025.
Sources: KBO register, filings at the National Bank, Belgian Official Gazette. Click a figure with a dotted line for the item and the filing.
Key facts about TECHNICAL WELDING SUPPORT
- What is the company number of TECHNICAL WELDING SUPPORT?
- The company number of TECHNICAL WELDING SUPPORT is 0464.142.723. The VAT number is the same number with BE in front: BE 0464.142.723.
- Where is TECHNICAL WELDING SUPPORT based?
- The registered office is at Lerrekensstraat 25/C, 2220 Heist-op-den-Berg.Company details
- What does TECHNICAL WELDING SUPPORT do?
- According to the KBO register, the main activity is manufacture of metal structures and parts of structures (NACE 25110).
- What is the legal form of TECHNICAL WELDING SUPPORT?
- TECHNICAL WELDING SUPPORT is a private limited company (BV).
- When was TECHNICAL WELDING SUPPORT founded?
- TECHNICAL WELDING SUPPORT was founded on 22-09-1998.
- Is TECHNICAL WELDING SUPPORT still active?
- Yes, TECHNICAL WELDING SUPPORT is an active enterprise in the KBO register.
- How many employees does TECHNICAL WELDING SUPPORT have?
- TECHNICAL WELDING SUPPORT had an average of 2 full-time equivalents in financial year 2025, according to the filed annual accounts.Financials
- What is the turnover of TECHNICAL WELDING SUPPORT?
- The turnover in financial year 2025 is ≈ €360,000. This figure is estimated from the gross margin of €145,721 and 2,201 comparable companies of the same size. It probably lies between €240,000 and €560,000. It is a rough estimate.
- Is TECHNICAL WELDING SUPPORT profitable?
- In financial year 2025, TECHNICAL WELDING SUPPORT made a profit of €23,093.
- Where can I find the annual accounts of TECHNICAL WELDING SUPPORT?
- TECHNICAL WELDING SUPPORT filed 27 annual accounts with the National Bank of Belgium, the latest for financial year 2025.
- When are the next annual accounts of TECHNICAL WELDING SUPPORT due?
- TECHNICAL WELDING SUPPORT must file the annual accounts for financial year 2026 by 31-07-2027.Timeline
Next steps
Work out how much credit to give this customer and on what payment terms.Credit check Check what to know before you do business with this company.Supplier due diligence Check whether you can trust this company with building work.Contractor check Check whether you can accept this company as a client under the anti-money-laundering law.AML client file Check which of your other customers you can e-invoice via Peppol.Peppol check See which support similar companies received that this one did not.Subsidies
See how customers, suppliers and banks see your own company and what to improve first.